I9 HUD Head Up display OBD2 Car Speed Projector Speedometer Car Detector Alarm

Description

Function of the screen:
1.
Speed: The number can indicate the current speed.
2.
Unit marks: V - voltage, ºC - degree Celsius, ºF - degree Fahr       enheit,KM - Kilometer, MPH - Mile, KM/H - kilometer per hour
3.
engine revolving speed icon
4.
Car Engine Speed：indicates the rotating status of the engine and the scale measured represents the speed reached.
5.
Fuel marks：When the fuel amount is less than 10% , the icon will flash to remind refueling (some models not applicable)
6.
Engine Fault：When the Engine failed ,This icon will light up to recmind
7.
Battery voltage：When the Battery Voltage lower than 12V, the icon will flash to alarm
8.
Water temperature mark: When the water temperature exceeds the    set value (default: 110 degrees), the corresponding warning light  shows that the water temperature value will flash quickly.
9.
Fatigue driving: When the single driving time exceeds the set value (default: 2 hours), the warning light displays a prompt.
Product Introduction:
Product Features:
• Display Information:Speed,RPM,Fuel Consumption,Voltage,Water Temperature,Trip Mileage,Trip Time...
• Alarm:RPM Alarm，Water Temperature Alarm，Low / High Voltage Alarm，Faulty Code Alarm, Fatigue     Driving Alarm...
• Features:Free switching between kilometer and miles, KM/h & MPH Switch freely, °C & ℉  switch freely.
HUD installation
1
. Ensure your vehicle is OBD|| compatible or EOBD.
A. Check around the area under the steering wheel for an OBD plug.
B. Contact your vehicle manufacturer or search online.
C. Open the bonenet and look for a OBD|| compatible sticker(this is NOT on all OBD|| compatible
cars,therefore isn't deciding factor)
2
. Locate the 16 pin diagnostic link (see picture ).
This is usually located in the area under the steering wheel.
Detail steps:
1,put non-slip mat;
2,put HUD on non-slip mat;
3,connect OBD cable with car OBD2 interface;
4,connect the other side of OBD2 cable with HUD ,and then start the engine;
5,stick the reflection on windshield.
FAQ:
1.May l be able to see my local time on the machine?
Of course, you can enter the setting item to adjust the time to your local time,in 24-hour format.
2.Can I want the speed unit in miles?
You can adjust miles or kilometers.
About feedback
If you are satisfied with our products and services, please leave 5 stars. Thank you for supporting us.
If you have any questions, please contact us first, we will try our best to solve the problem to your satisfaction.Tks