TPI 708A740 Combustion Analyzer Kit with Printer

Description

AUTHORIZED DISTRIBUTOR
TPI 708A740 Combines the 708 Combustion Efficiency Analyzer with the A740 Infrared Printer - TPI Model 708 Combustion Efficiency Analyzer. The carbon monoxide sensor used in TPI combustion efficiency analyzers feature an on-board filter capable of filtering NO (nitric oxide), NO2 (nitrogen dioxide) and NOX (combination of NO and NO2) to prevent cross sensitivity errors.                                                                                                                                                                                                                                                                                   Use TPI analyzers to test flue gases in gas and oil fired equipment including high efficiency furnaces and condensing boilers.
Measure
CO
, O2, and stack temperature                            Determine combustion efficiency, CO2, and CO air free. Some models include built-in differential manometer, combustible gas detection, PC communication, data logging, and can measure NO / NOX.
All TPI analyzers feature quick and simple set up. Fast purge and the ability to perform fuel selectionduring start up enable tests to be performed quickly without requiring extra set-up time after initial startup. TPI analyzers also use the last selected fuel as the default setting. This feature prevents the need toperform fuel selection every time the analyzer is turned on.
Using TPI analyzers to determine combustion efficiency at the time of equipment set up minimizes call backs and can be used to verify to the home owner the value of service work by showing the increase in equipment efficiency after work is performed. Efficiency calculation can also be used to generate business by demonstrating the need to improve the efficiency of equipment or to show the benefit of purchasing new equipment with higher efficiency.
Product Features:
Measure CO, and temperature
Calculate CO2, efficiency, excess air, and CO air free
Calculates combustion efficiency
Pump driven for fast response
Will not shut off if 15 ppm CO is present for increased safety
Ten selectable fuels: Natural Gas, LPG, Light Oil, Heavy Oil, Bituminous Coal, Anthracite Coal, Coke, Butane, Wood, Bagasse
Optional A740 IR printer available for hard copies of test results
Built-in differential thermometer
Store function to save up to 50 readings
Large easy to read backlit display
TPI 708 Flue Gas Analyzer comes complete with
the following standard accessories:
TPI 708 Instrument
Rubber Boot (A765)
Soft Carrying Case (A768)
Flue Sampling Probe (A770)
In-Line Filter assembly installed on Flue probe (A794)
Temperature Probe (GK11M)
Mini Pump Protection Filter Assembly and spare filters (A763)
Exhaust Spigot (removable) (A764)
Instruction Manual
Model 708 Applications:
Tuning of residential and furnaces and domestic boilers
Ambient and stack testing for CO
CO safety measurements in and around combustion sources
Temperature checking, including superheat and hydronic differential temperatures
Model 708 Specifications
Carbon Monoxide (CO)
Measurement
Range 0 to 10,000 ppm
Resolution 1 ppm
Accuracy +/-5ppm or 5% of reading whichever is greater
Oxygen (02) Measurement
Range 0 to 25%
Resolution 0.1%
Accuracy ±0.3%
Carbon Dioxide (CO2)
Range 0 to 25%
Resolution 0.1%
Calculated Value
Nitric Oxide Measurement
N/A
NOX Measurement
N/A
Temperature Measurement
Range -40 to 1472°F, or -40 to 800°C
Resolution 1°F or °C
Accuracy (K-type) ±0.3%, ±2°F or ±1°C
Draft/Pressure
Measurement
Selectable Ranges mBar,kPa, and inH2O
Ranges -150 mBar to +150 mBar -15 kPa to +15 kPa -60
inH2O to +60 in H20
Resolution 0.001 inH2O
Accuracy ±0/5% fsd
Gross/Net Efficiency
Range 0 to 100%
Resolution 0.1%
Calculated Value
CO/CO2 Ratio
Range 0 to 0.999
Resolution 0.001
Calculated Value
Operating Temperature
14°F to 122°F (-10°C to 50°C)
Battery Type
1.5V AA (3)
Selectable Fuels
Natural Gas, LPG, Light Oil, Heavy Oil, Bituminous Coal,
Anthracite Coal, Coke, Butane, Wood, Bagasse
Display Type
Backlit 3 line LCD
Data Storage
50 Locations
Data Logging
N/A
Print Capability
Yes, via optional IR printer (A740)
PC Communication
N/A
Date and Time Function
24 Hour Real Time Clock
Dimensions
200mm x 90mm x 60mm
Weight
500g
Conformity
BS7927 (and the draft BS7967)
A740 Features:
Power On indication (red LED)
Adjustable contrast (low, norm, high)
Manual paper feed (advance)
Operates on 4 “AA” batteries or optional AC adapter
Self test at Power On
3-Year Warranty
A740 Specifications:
Maximum Transmitting Distance:
18 inches (45cm)
Maximum Horizontal Receiving Angle:
±30°
Verticle Receiving Angle:
-10° to +20°
Battery Power:
4 x 1.5V Alkaline Batteries
Adapter:
DC 9V / 1A, 60Hz, 120V (CUL) / (DC 7V / 1500mA, 50Hz, 240V [CE])
Paper:
A746
Operating Temperature:
32°F to 122°F (0°C to 50°C)
Operating Humidity:L
5% to 80% Relative Humidity
Storage Temperature:
14°F to 140°F (-10°C to 60°C)
What's in the Box
Infrared printer (A740);
Rubber Boot (A765);
Soft Carrying Case (A768);
Flue Sampling Probe (A770);
In-Line Filter assembly installed on Flue probe (A794);
Temperature Probe (GK11M);
Mini Pump Protection Filter Assembly and spare filters (A763);
Exhaust Spigot (removable) (A764);
Instruction Manual;